The Perfect Combination of GIHUG Oxidized Polyethylene Wax and Road Marking Paint

Oxidized polyethylene wax is used as an auxiliary material for road marking paints to adjust the performance of pavement marking paints. It has high melting point, high hardness, no cracking, no ash, abrasion resistance and scratch resistance. Shorten the non-stick time of road marking paint, improve the fluidity of the vehicle, and form an anti-fouling layer on the surface after the coating is solidified, keep the clean color of the marking line, and the oxidized polyethylene wax product flows very well, which can improve the toughness , adhesion, stain resistance, compressive strength and anti-slip ability of the road marking paint.

GIHUG oxidized polyethylene wax T-4017 is mainly used in hot melt road marking paint, which has the following characteristics:

• (1) High softening point can improve the heat resistance of road marking paint; low viscosity, can adjust and improve leveling, good flow performance, easy to construct and improve construction efficiency.
• (2) Wear resistance, scratch resistance, and anti-scratch: The wax is distributed in the coating film to protect the coating film, prevent scratches, scratches, and provide abrasion resistance.
• (3) Control the friction coefficient: Because of its low friction coefficient to provide excellent slip of the coating film, and at the same time, it has a special silk soft touch due to different kinds of wax.
• (4)Chemical resistance: due to the stability of the wax can give the coating film better water resistance, salt spray resistance and other properties.
• (5) Preventing the bonding: avoiding the phenomenon that the coated object or the printed matter has a sticky back and a conformation.
• (6)Control gloss: select the appropriate model, depending on the amount of addition, there are different matting and glossing effect, the three-dimensional feeling is good.
• (7) Prevent the hard deposit of auxiliary materials such as silica and increase the storage stability of the coating.
• (8) It is especially recommended for oscillating line horse road marking paint, which has good wetting and dispersing effect on titanium dioxide powder.

This product is woven packaged, 25 kg / bag, protected from light and moisture, it is recommended to add 1% -2%.

In addition, the addition of GIHUG oxidized polyethylene wax to the road marking paint formulation will not affect the original performance of the product.As the saying "Add a beautiful thing to a contrasting beautiful thing" and "Be a tiger with wings added",the PE wax is that "beautiful thing" and "wings".

Please use WeChat to scan this QR code, add and follow our WeChat public account.